@kl3m3n
I tested an it works as excepted! Thanks 🙂

Best regards,
forest70

Hi @kl3m3n,

Thanks, I know this chip, but never used it

I have done in the last 20 years almost all my projects with Bascom and Atmega and Xmega microcontrollers, but there are no libraries like in the Arduino, you have to code everything from scratch. With the Esp32 this task is easier, for this there is the lib can.h and you only need the soic8 driver for the bus.

The advantage is that the Atmega88PA is cheaper than the Esp32 but I will still think about which one to choose

Thanks for the attempt to help

Regards

Hi @kl3m3n,

It works perfectly, thank you very much.

You are the best! 💪

Best regards

@SteveV

No problem! Thanks for the feedback 🙂

If you have any more issues, feel free to ask!

Best regards,
Klemen

@kl3m3n

Thank you

Regards

@Bernard I am glad that you've solved it!

@gammda has made some great projects in the past, so he is definitely a GUI-O expert! 🙂🙂

Best regards.
Kl3m3n

@somasundaram-i Hi,

I tried reproducing the issue on 1280x720 emulator and everything seems to work fine.

This image represents an image with non 1280x720 resolution, stretched to the entire available screen:

1280x720_image.png

This image represents an image with 1280x720 resolution:

1280x720_image2.png

The GUI-O init command is:

|IM UID:im0 X:50 Y:50 W:100 H:100 IP:"<image>" SCM:1\r\n

Best regards,
Kl3m3n

@jeremy0 Hi.

@kl3m3n said in Connection status?:

Connection monitor (separate for each connection type). If the feature is enabled, GUI-O app requires periodic messages (e.g., ping) after first received message. Otherwise, it will disconnect and enter error state. I will also support that the feature can be enabled from the controller command.

Implemented. See the latest manual, section Connection monitor.
I did not support enabling / disabling the connection monitoring via the commands. This can only be done in-app.

@kl3m3n said in Connection status?:

Any error that causes a disconnect will clear the UI.

Implemented.

@kl3m3n said in Connection status?:

Add support for @disconnect command. This will make it possible to send a disconnect request from the controller side. This will also clear the UI. User can then reconnect via the "Connect" button on top-left part of the home screen.

Implemented. See latest manual.

@kl3m3n said in Connection status?:

Add some sort of connected indicator when connected and on home screen (no UI loaded).

Implemented. A small indicator in the top-right corner of Connect button (home screen) shows if device is connected (green dot) or disconnected (red dot).

Best regards,
Kl3m3n

@sato Hello,

version 0.11.33 (which will be available shortly) has custom navigation bar which can be disabled through the "General settings" menu.

Best regards,
kl3m3n

@sato please try first official version 1.0.0. Flick widget sensitivity property is implemented here (please see the latest manual).

P.S. If you like the app, it would be very nice if you could rate it on Google Store 🙂

@kl3m3n Hi!
Thanks, that makes sense.

Regarding Ethernet connection, does it follow the steps outlined in Fig.7 Direct device pairing procedure of the manual?. Is that how it connects to the designer tool too?.

Regards,
Denes

Hi Kl3m3n,

A sincere thank you.
The whole process seems to be quite complex. In my case, it is for Windows.
I am trying to get a fixed IP. The ISP operators want a high value. I will look for cheaper ones.
In the next few days I'll try to install it and do some tests. I will give you my feedback then.
Thanks again for your support.

Best regards

@kl3m3n
Sweet! No more nightmares about jumbled text columns 😉

Thank you! I happily left you ***** on google play.

Greetings.

@Hub said in Selectable language:

Hello @kl3m3n,

I can help with translation into Polish.

Regards,
Hubert

Thanks! 🙂
First, I need to prepare some stuff for this feature. I will let you know.

@kl3m3n
The new release (1.0.73) fixed the problem with the wrong? keyboard on my Samsung tablet.
I was then able to connect to GUI-O Live Design, and downloaded the TemperatureReader.gdp. All appears to work, although I am struggling to do anything different with the Designer in these early stage
Good job - thanks.
Cheers
Steve

@RudiP

I have prepared version v1.0.106 - you will be notified within the app when the upgrade is available. This version also fixes your issue.

If you feel like it, please support GUI-O and leave a feedback on the app store (please make sure you are not in the Beta testing program before giving feedback - you can tap on the Leave button):
https://play.google.com/store/apps/details?id=com.guio.guioapp

Best regards,
Kl3m3n

Hello @kl3m3n,

Like you say, implementing a control for language selection from the GUI-O app side, which is then stored in EEPROM of the microcontroller, is a good choice.

Regards

Hi Kl3m3n,

This works, only the IP without the SCI and VIS

mqttClient.publish(&In[0], "@im8 IP:"https://i.imgur.com/vFexxxx.png"\r\n");

Solved
Thanks

Hi @kl3m3n,

You're right, it really doesn't make sense. Forget it

Thanks

Regards

Hi @kl3m3n,

I think it's a bug on my side, I'll keep checking and if necessary I'll feeebck again.

Thank You

BR