How much notifications append without to open Gui-O

Sato

Here the Log from the PC_SerialPort
12:26:05.237 -> Language 2
12:26:05.237 -> MQTT connecting...
12:26:05.610 -> MQTT connected!
12:30:55.920 -> Notification send * reserviert *
12:35:57.190 -> Notification send * Kabine Lastgrenze *
12:40:57.231 -> Notification send * Motorwärmesensor Fehler *
12:45:57.203 -> Notification send * Nr_failure 0 *
12:50:57.226 -> Notification send * Manuelle Tür schließt nicht. *
13:00:57.217 -> Notification send * Schwache kommunikation *
13:05:57.253 -> Notification send * Sicherheitskreis Ausfall während der Bewegung *
13:10:57.236 -> Notification send * Schwache kommunikation *
13:15:57.272 -> Notification send * Auf der Etage angehalten, Kommunikationsfehler *
13:20:57.278 -> Notification send * Stromausfall *
13:25:57.261 -> Notification send * Motorwärmesensor Fehler *
13:30:57.268 -> Notification send * Stromausfall *
13:35:57.284 -> Notification send * Zwangskalibrierung durchgeführt *
13:40:57.261 -> Notification send * Sicherheitskreis in Bewegung wiederhergestellt *
13:45:57.305 -> Notification send * Übertemperatur in der Steuerung *
13:50:57.304 -> Notification send * Tür schließen Versuche überschritten *
13:55:57.317 -> Notification send * Motorwärmesensor Fehler *
14:00:57.295 -> Notification send * Manuelle Tür schließt nicht. *

Comparing both, it looks like the Printscreen is missing some notifications.
I think this Serial port format, would be ideal. I don't know if it is possible for You to do it so.
The timestamp comes from the Arduino Serial Port. I disabled sending the RTC time from my device, because it's not necessary, you already send that info in the Push notification.

I haven't done any more tests yet. Perhaps you can check why notifications are missing on the Printscreen.

A useful function would be that by pressing CLEAR ALL, before deleting, this content could always be incremented "APPEND" in a Log_Push file in the Gui-O document area on the cellphone. It could later be used if needed to analyze failures over time, but it is just an idea.

BR

kl3m3n

@sato Hello,

I am sorry, but I do not understand this...

Where is "PixelBox - Obra_21..." text on the serial console? There seems to be some missing text that is shown on the print screen, but not on the serial console.

Serial port format - I don't understand this either. You mean there should be a -> sign? Maybe the seconds could also be displayed, but milliseconds is an overkill.

Again, I don't understand what does "APPEND" mean?

BR,
kl3m3n

Sato

Hi @kl3m3n,
"PixelBox" is the product type
"Obra_21 R. do Caires 46" is the location
In this case prepared to: PixelBox - Obra_21 R. do Caires 46 is the complet device name = pixelbox_id

pushNotification += pixelbox_id += failure;
mqttClient.publish(&Push[0], (const char*) pushNotification.c_str());

So, the Push notification from this device is like:
PixelBox - Obra_21 R. do Caires 46 * Stromausfall *
------------ pixelbox_id ---------- -- Failure --

The results on the Gui-O App should be like this, if possible.
[your timestamp] PixelBox - Obra_21 R. do Caires 46 * Stromausfall *
[your timestamp] PixelBox - Obra_21 R. do Caires 46 * Übertemperatur in der Steuerung *
----- can receive Push from other device too, is this case from location: OF24 R. de Paris Nr.12 -----
[your timestamp] PixelBox - OF24 R. de Paris Nr.12 * Stromausfall *
[your timestamp] PixelBox - Obra_21 R. do Caires 46 * Max Temperatur *

The Arduino timestamp, have it activated to compare with the Gui-O Push notifications timestamps.
To simply the debug, only for my serial port, i filter out the PixelBox and location, than for the tests have only one device connected, that send notifications every 5 minutes
---------simplified Serial port output ----------
17:04:01.408 -> Push * Beide Bremsschalter Defekt *
17:09:01.370 -> Push * Kabine Lastgrenze *

What i mean with Append, is: Gui-O can create a txt file on the Gui-O area on the cellPhone memory.
When click on CLEAR ALL, before delete the notifications, write it to this txt file:
[your timestamp] PixelBox - Obra_21 R. do Caires 46 * Übertemperatur in der Steuerung *
[your timestamp] PixelBox - OF24 R. de Paris Nr.12 * Stromausfall *
[your timestamp] PixelBox - Obra_21 R. do Caires 46 * Max Temperatur *

Next time clicking CLEAR ALL, befor delete, open this txt file again and write "append" to that txt file the content of the received Push notific. on Gui-O:
[your timestamp] PixelBox - OF24 R. de Paris Nr.12 * Batterie Ausfall *
[your timestamp] PixelBox - Obra_21 R. do Caires 46 * Min Temperatur *

so the txt file as now the sumary of the content of both times, the 5 Push notifications lines, and so on.....

When need to look for any reason all the received notifications, we can go to the Gui-O memory area and copy this txt file and open it on a editor.

I hope I was able to explain it in a way you can understand
BR

kl3m3n

@sato there is already a log for push notifications. You can open it from the GUI-O app. It is located in the "Notifications" folder on the device. You can also set how many notifications are shown (press the menu entry to change)...

See screenshot below.

Every new notification gets a timestamp, so I still don't understand your format? The notifications are already displayed like this. Control the timestamp with publish messages. Each publush will get its own timestamp.
Where the text breaks - this is up to the Android...

BR,
kl3m3n

Screenshot_2022-06-13-20-55-20-756_com.guio.guioapp.jpg

Sato

Hi @kl3m3n,
Sorry, I didn't see that you had already added that feature.
Good, that way we always have a backup of all notifications, just in case we ever need it.

If I want to delete the whole content of that file, because it has too many test notifications, how can I do it?

Output on Gui-O
Look that here the timestamp are no more to see, wich of these notifications are send with 5 minutes interval
[21:09] PixelBox - Obra_21 R. do Caires 46 * Position is changed * * Fehler Bremsschalter2 * * Motorwärmesensor normalisiert *

Where the text breaks - this is up to the Android.
It could be, but all the notifications are sent with their timestamps, where are they?

That's should look like. Every notification separated trough the timestamp.
[21:09] PixelBox - Obra_21 R. do Caires 46 * Position is changed *
[21:04] PixelBox - Obra_21 R. do Caires 46 * Fehler Bremsschalter2 *
[20:59] PixelBox - Obra_21 R. do Caires 46 * Motorwärmesensor normalisiert *

Another issue is that from the 4th notification, Gui-O stops receiving more notifications. To continue receiving, I have to open the App, after 5 minutes I receive the next notification, and so on.

Another question, if I want my device to send Push Notifications to 2 or 3 cell phones, is that possible?
So, would Gui-O have to support more than one Application UUID, or can it be colonized?

BR

kl3m3n

@sato said in How much notifications append without to open Gui-O:

If I want to delete the whole content of that file, because it has too many test notifications, how can I do it?

Currently, you need to do this from the system's "file manager" app. Go to Android/data/com.guio.guioapp/files/Notifications

I can add a delete icon to the GUI-O app.

@sato said in How much notifications append without to open Gui-O:

Another issue is that from the 4th notification, Gui-O stops receiving more notifications. To continue receiving, I have to open the App, after 5 minutes I receive the next notification, and so on.

Are you sure you have "Autostart" for GUI-O enabled from the system settings? Sometimes, on my device the service is also killed by the OS, but the OS restarts it automatically after 1 second.

@sato said in How much notifications append without to open Gui-O:

Another question, if I want my device to send Push Notifications to 2 or 3 cell phones, is that possible?

No problem, just use the application UUID for each GUI-O app, when sending the notification. Each device has a unique id, so you just need to publish to the appropriate topic from your device side.

BR,
kl3m3n

Sato

Hi @kl3m3n

Do you mean
Autoconnect (Automatically (re)connect )
Put it now ON. I will test if it fix the frozen of the App, i hope it does

I have 4 notifications and the 5 minutes time has passed, as such I should receive the next one, but it don't, to continue receiving I have to open the App

Here we have 3 notifications with only one timestamp, so as more notifications arrive, they are added to the existing ones, which without the timestamps separates them, gets a little bit confusing.

[10:09] PixelBox - Obra_21 R. do Caires 46 * Position verloren * * Bremsschalter2 * * Motorwärmesensor normalisiert *

This is better. Can you fix that to this?
[10:09] PixelBox - Obra_21 R. do Caires 46 * Position verloren *
[10:04] PixelBox - Obra_21 R. do Caires 46 * Bremsschalter2 *
[09:59] PixelBox - Obra_21 R. do Caires 46 * Motorwärmesensor normalisiert *

Phone1 UUID
//static const char *Push = "e79a7f79-9fe5-4322-aee3-cfd10f940b1d/notifications";
Phone2 UUID
static const char *Push = "d3f1e986-16b3-4158-9724-52db22471d0c/notifications";

//send Push
mqttClient.publish(&Push[0], (const char*) pushNotification.c_str());

If uncomment the Phone1 UUID, the compiler show a error. Redefinition of 'const char* Push'

BR

kl3m3n

@sato said in How much notifications append without to open Gui-O:

Do you mean
Autoconnect (Automatically (re)connect )
Put it now ON. I will test if it fix the frozen of the App, i hope it does

No, I mean in the Android OS settings. When you turn on the notifications, it displays a message -> "App settings". Click on it and set the values according / similar to this (see images under this link):

https://www.gui-o.com/examples#h.ujq2e0ve4vac

@sato said in How much notifications append without to open Gui-O:

Here we have 3 notifications with only one timestamp, so as more notifications arrive, they are added to the existing ones, which without the timestamps separates them, gets a little bit confusing.

This is a problem on your side. You need to send push notifications one - by one. You are sending them all together...

So, like this:

// first notification...
String pushNotification = "your data...";
mqttClient.publish(&Push[0], (const char*) pushNotification.c_str());

// second notification...
pushNotification = "your new data";
mqttClient.publish(&Push[0], (const char*) pushNotification.c_str());

// third notification...
pushNotification = "your new new data";
mqttClient.publish(&Push[0], (const char*) pushNotification.c_str());

and so on...

@sato said in How much notifications append without to open Gui-O:

If uncomment the Phone1 UUID, the compiler show a error. Redefinition of 'const char* Push'

Of course, you cannot redefine a variable... Do it like this.

//Phone1 UUID
static const char *Push1 = "e79a7f79-9fe5-4322-aee3-cfd10f940b1d/notifications";
//Phone2 UUID
static const char *Push2 = "d3f1e986-16b3-4158-9724-52db22471d0c/notifications";

then

mqttClient.publish(&Push1[0], (const char*) pushNotification.c_str());

mqttClient.publish(&Push2[0], (const char*) pushNotification.c_str());

P.S. You should not reveal your app id. Now I can send a false push notification to your device Of course, I need access to the broker (which is "public" in this case).

BR,
kl3m3n

Sato

Hi @kl3m3n,

No, I mean in the Android OS settings.
Have not this setting on my Android 12. I search for Auto on settings and it show Android Auto, and there is all options ON

You should not reveal your app id. Now I can send a false push notification to your device
No you can't. Have modified the tokens before sending

This is a problem on your side
No, you can see on my serial port that every 5 minutes
only one Push notification is send at time, with Arduino serial port timestamp

//----- Push notifications every 5 minutes for testings!! --------
void loop() {
if (alert == 1) {
Push_falha(); // send Push
alert = 0; // The timer set it again when passed 5 minutes
}
unsigned long currentTime2 = millis();
if (currentTime2 - previousTime2 >= eventInterval2) { // 5 Min
const String numberStr(random(27));
nr_falha = numberStr.toInt(); //random failure number
alert = 1; // time is passed, set flag, so it can send Push again
previousTime2 = currentTime2;
}
}

void Push_falha() {
/* PUSH NOTIFICATION /
texto_falha(); // get the failure text to the variable "avaria"
// ---- add the failure to Historico.txt ----
//-------------------------------------------------------------
strdata = "02-04-2022 14:57"; // Later get timestamp from RTC
strdata = avaria += strdata;
adiciona_falha(); // add to file Historico.txt
// ------------------------------------------------------------
String pushNotification("PixelBox - ");
// send the Push
pushNotification += pixelbox_id += avaria;
mqttClient.publish(&Push[0], (const char)
pushNotification.c_str());
// Print it on serial port
Serial.print("Notification done ");
Serial.println(avaria); // print the failure
nr_falha = 0; // clear the failure number
}

Thanks for tip to send the Push for more then one UUID

BR

kl3m3n

@sato

What happens when you tap the "App Settings" (see image below)?
Screenshot_2022-06-14-15-18-53-055_com.guio.guioapp.jpg

@sato said in How much notifications append without to open Gui-O:

No you can't. Have modified the tokens before sending

Very nice!

@sato said in How much notifications append without to open Gui-O:

mqttClient.publish(&Push[0], (const char)
pushNotification.c_str());

Does this code compile? It should be (const char *).

Sato

@kl3m3n,

Have the same info on IoT settings

Yes, it compile

BR

Sato

@kl3m3n,

Perhaps have make a error on copy and paste, but on the code here it is:
mqttClient.publish(&Push2[0], (const char*) pushNotification.c_str());

and it compile

Another question: On my other Android 10 i have allready the new version v.1.0.10.1 but i not make any update, do it make the update automatically without to ask?

BR

kl3m3n

@sato said in How much notifications append without to open Gui-O:

@kl3m3n,

Have the same info on IoT settings

Yes, it compile

BR

Yes, I know, what happens if you press App Settings?

kl3m3n

@sato said in How much notifications append without to open Gui-O:

@kl3m3n,

Perhaps have make a error on copy and paste, but on the code here it is:
mqttClient.publish(&Push2[0], (const char*) pushNotification.c_str());

and it compile

Another question: On my other Android 10 i have allready the new version v.1.0.10.1 but i not make any update, do it make the update automatically without to ask?

BR

This is up to you. You can disable auto update feature from Google Play app. It has nothing to do with GUI-O.

Sato

@kl3m3n,

Now I am sending the Push notification to both cell phones. I pressed on both CLEAR ALL and also clear my serial port.
5 minutes later, get on both phones the new notification, but it as also added the text of the two previous notifications before the CLEAR ALL pressed.

In the Serial port I only have now one notification and that's is correct.

Maybe, you have some Buffer that you don't clear and then the new notification text is sent along with previous notifications?

BR

kl3m3n

@sato said in How much notifications append without to open Gui-O:

Hi @kl3m3n,

No, I mean in the Android OS settings.
Have not this setting on my Android 12. I search for Auto on settings and it show Android Auto, and there is all options ON

You should not reveal your app id. Now I can send a false push notification to your device
No you can't. Have modified the tokens before sending

This is a problem on your side
No, you can see on my serial port that every 5 minutes
only one Push notification is send at time, with Arduino serial port timestamp

//----- Push notifications every 5 minutes for testings!! --------
void loop() {
if (alert == 1) {
Push_falha(); // send Push
alert = 0; // The timer set it again when passed 5 minutes
}
unsigned long currentTime2 = millis();
if (currentTime2 - previousTime2 >= eventInterval2) { // 5 Min
const String numberStr(random(27));
nr_falha = numberStr.toInt(); //random failure number
alert = 1; // time is passed, set flag, so it can send Push again
previousTime2 = currentTime2;
}
}

void Push_falha() {
/* PUSH NOTIFICATION /
texto_falha(); // get the failure text to the variable "avaria"
// ---- add the failure to Historico.txt ----
//-------------------------------------------------------------
strdata = "02-04-2022 14:57"; // Later get timestamp from RTC
strdata = avaria += strdata;
adiciona_falha(); // add to file Historico.txt
// ------------------------------------------------------------
String pushNotification("PixelBox - ");
// send the Push
pushNotification += pixelbox_id += avaria;
mqttClient.publish(&Push[0], (const char)
pushNotification.c_str());
// Print it on serial port
Serial.print("Notification done ");
Serial.println(avaria); // print the failure
nr_falha = 0; // clear the failure number
}

Thanks for tip to send the Push for more then one UUID

BR

Do you clear "avaria" variable? And "pixelbox_id"? Where do they come from?

Sato

@kl3m3n,
Sorry to come back to the same topic, but I think Push notifications should become well functional.

From the fourth notification, I stop receiving the following ones on both phones.
Then I pressed CLEAR ALL on both phones, that cleared the notifications data on the phones, but I still don't receive the notifications that are being sent. All the followed notifications I can see on the serial port.

Please take a look at it calmly, surely you can solve it.

Best Regards

Sato

@kl3m3n,

Since I now receive notifications simultaneously on both phones it is easier to make comparisons.

Serial Port debug!
16:00:49.760 -> Push * Zeit zwischen Impulsen überschritten *
16:05:49.767 -> Push * Fehler Bremsschalter1 *
16:10:49.754 -> Push * Beide Bremsschalter Defekt *
16:15:49.773 -> Push * Beide Bremsschalter Defekt *
//Receiving two identical failures in a row is normal because I haven't filtered it yet

From here, the notifications are no more received, on both Phones, must open a Gui-O on one from them, then it works again
16:20:49.763 -> Push * Außerhalb der Türzone angehalten *

These are the screenshots from both, hope it helps.

Best regards

kl3m3n

@sato ok, let's go step-by-step...

Please try to answer the questions below:

Navigate to "Settings -> Quick pair -> IoT settings" and disable IoT notifications. Enable them and when the second dialog pops up, please press the "App settings" button and send the screenshot.
Navigate to "Settings -> Quick pair -> IoT settings" and check "Notifications to show". What number does it show? For example, is it showing "Showing 3 recent"? This means the number of notification that will be shown. The oldest notification gets discarded when a new notification arrives. Note that Android cannot show unlimited notifications on screen. You can change the number of notifications to show by pressing the menu entry.
I am attaching a windows script that periodically sends the notifications to the specified channel. First download and install mosquitto from https://mosquitto.org/download/

Then download this pub_test.txt
and rename extension to ".bat". Open the script and modify <application UUID> for your case. You can also modifiy the time period with which the notifications are sent... It is 5 seconds by default (see timeout value).

Please test if this works with your device.

BR,
kl3m3n

Sato

Hello @kl3m3n,

Here the screenshot of Point 1 and Point 2

Have installed mosquitto and run your script with timeout of 10 seconds
Here the screenshot too

Screenshot_Point 2.jpg Screenshot_Point 1.jpg

BR