How much notifications append without to open Gui-O

Sato

No, I mean in the Android OS settings.
Have not this setting on my Android 12. I search for Auto on settings and it show Android Auto, and there is all options ON

You should not reveal your app id. Now I can send a false push notification to your device
No you can't. Have modified the tokens before sending

This is a problem on your side
No, you can see on my serial port that every 5 minutes
only one Push notification is send at time, with Arduino serial port timestamp

//----- Push notifications every 5 minutes for testings!! --------
void loop() {
if (alert == 1) {
Push_falha(); // send Push
alert = 0; // The timer set it again when passed 5 minutes
}
unsigned long currentTime2 = millis();
if (currentTime2 - previousTime2 >= eventInterval2) { // 5 Min
const String numberStr(random(27));
nr_falha = numberStr.toInt(); //random failure number
alert = 1; // time is passed, set flag, so it can send Push again
previousTime2 = currentTime2;
}
}

void Push_falha() {
/* PUSH NOTIFICATION /
texto_falha(); // get the failure text to the variable "avaria"
// ---- add the failure to Historico.txt ----
//-------------------------------------------------------------
strdata = "02-04-2022 14:57"; // Later get timestamp from RTC
strdata = avaria += strdata;
adiciona_falha(); // add to file Historico.txt
// ------------------------------------------------------------
String pushNotification("PixelBox - ");
// send the Push
pushNotification += pixelbox_id += avaria;
mqttClient.publish(&Push[0], (const char)
pushNotification.c_str());
// Print it on serial port
Serial.print("Notification done ");
Serial.println(avaria); // print the failure
nr_falha = 0; // clear the failure number
}

Thanks for tip to send the Push for more then one UUID

BR

kl3m3n

@sato

What happens when you tap the "App Settings" (see image below)?
Screenshot_2022-06-14-15-18-53-055_com.guio.guioapp.jpg

@sato said in How much notifications append without to open Gui-O:

No you can't. Have modified the tokens before sending

Very nice!

@sato said in How much notifications append without to open Gui-O:

mqttClient.publish(&Push[0], (const char)
pushNotification.c_str());

Does this code compile? It should be (const char *).

Sato

@kl3m3n,

Have the same info on IoT settings

Yes, it compile

BR

Sato

@kl3m3n,

Perhaps have make a error on copy and paste, but on the code here it is:
mqttClient.publish(&Push2[0], (const char*) pushNotification.c_str());

and it compile

Another question: On my other Android 10 i have allready the new version v.1.0.10.1 but i not make any update, do it make the update automatically without to ask?

BR

kl3m3n

@sato said in How much notifications append without to open Gui-O:

@kl3m3n,

Have the same info on IoT settings

Yes, it compile

BR

Yes, I know, what happens if you press App Settings?

kl3m3n

@sato said in How much notifications append without to open Gui-O:

@kl3m3n,

Perhaps have make a error on copy and paste, but on the code here it is:
mqttClient.publish(&Push2[0], (const char*) pushNotification.c_str());

and it compile

Another question: On my other Android 10 i have allready the new version v.1.0.10.1 but i not make any update, do it make the update automatically without to ask?

BR

This is up to you. You can disable auto update feature from Google Play app. It has nothing to do with GUI-O.

Sato

@kl3m3n,

Now I am sending the Push notification to both cell phones. I pressed on both CLEAR ALL and also clear my serial port.
5 minutes later, get on both phones the new notification, but it as also added the text of the two previous notifications before the CLEAR ALL pressed.

In the Serial port I only have now one notification and that's is correct.

Maybe, you have some Buffer that you don't clear and then the new notification text is sent along with previous notifications?

BR

kl3m3n

@sato said in How much notifications append without to open Gui-O:

Hi @kl3m3n,

No, I mean in the Android OS settings.
Have not this setting on my Android 12. I search for Auto on settings and it show Android Auto, and there is all options ON

You should not reveal your app id. Now I can send a false push notification to your device
No you can't. Have modified the tokens before sending

This is a problem on your side
No, you can see on my serial port that every 5 minutes
only one Push notification is send at time, with Arduino serial port timestamp

//----- Push notifications every 5 minutes for testings!! --------
void loop() {
if (alert == 1) {
Push_falha(); // send Push
alert = 0; // The timer set it again when passed 5 minutes
}
unsigned long currentTime2 = millis();
if (currentTime2 - previousTime2 >= eventInterval2) { // 5 Min
const String numberStr(random(27));
nr_falha = numberStr.toInt(); //random failure number
alert = 1; // time is passed, set flag, so it can send Push again
previousTime2 = currentTime2;
}
}

void Push_falha() {
/* PUSH NOTIFICATION /
texto_falha(); // get the failure text to the variable "avaria"
// ---- add the failure to Historico.txt ----
//-------------------------------------------------------------
strdata = "02-04-2022 14:57"; // Later get timestamp from RTC
strdata = avaria += strdata;
adiciona_falha(); // add to file Historico.txt
// ------------------------------------------------------------
String pushNotification("PixelBox - ");
// send the Push
pushNotification += pixelbox_id += avaria;
mqttClient.publish(&Push[0], (const char)
pushNotification.c_str());
// Print it on serial port
Serial.print("Notification done ");
Serial.println(avaria); // print the failure
nr_falha = 0; // clear the failure number
}

Thanks for tip to send the Push for more then one UUID

BR

Do you clear "avaria" variable? And "pixelbox_id"? Where do they come from?

Sato

@kl3m3n,
Sorry to come back to the same topic, but I think Push notifications should become well functional.

From the fourth notification, I stop receiving the following ones on both phones.
Then I pressed CLEAR ALL on both phones, that cleared the notifications data on the phones, but I still don't receive the notifications that are being sent. All the followed notifications I can see on the serial port.

Please take a look at it calmly, surely you can solve it.

Best Regards

Sato

@kl3m3n,

Since I now receive notifications simultaneously on both phones it is easier to make comparisons.

Serial Port debug!
16:00:49.760 -> Push * Zeit zwischen Impulsen überschritten *
16:05:49.767 -> Push * Fehler Bremsschalter1 *
16:10:49.754 -> Push * Beide Bremsschalter Defekt *
16:15:49.773 -> Push * Beide Bremsschalter Defekt *
//Receiving two identical failures in a row is normal because I haven't filtered it yet

From here, the notifications are no more received, on both Phones, must open a Gui-O on one from them, then it works again
16:20:49.763 -> Push * Außerhalb der Türzone angehalten *

These are the screenshots from both, hope it helps.

Best regards

kl3m3n

@sato ok, let's go step-by-step...

Please try to answer the questions below:

Navigate to "Settings -> Quick pair -> IoT settings" and disable IoT notifications. Enable them and when the second dialog pops up, please press the "App settings" button and send the screenshot.
Navigate to "Settings -> Quick pair -> IoT settings" and check "Notifications to show". What number does it show? For example, is it showing "Showing 3 recent"? This means the number of notification that will be shown. The oldest notification gets discarded when a new notification arrives. Note that Android cannot show unlimited notifications on screen. You can change the number of notifications to show by pressing the menu entry.
I am attaching a windows script that periodically sends the notifications to the specified channel. First download and install mosquitto from https://mosquitto.org/download/

Then download this pub_test.txt
and rename extension to ".bat". Open the script and modify <application UUID> for your case. You can also modifiy the time period with which the notifications are sent... It is 5 seconds by default (see timeout value).

Please test if this works with your device.

BR,
kl3m3n

Sato

Hello @kl3m3n,

Here the screenshot of Point 1 and Point 2

Have installed mosquitto and run your script with timeout of 10 seconds
Here the screenshot too

Screenshot_Point 2.jpg Screenshot_Point 1.jpg

BR

kl3m3n

@sato Again, please press the "App settings" text / button. This is the screenshot I need to examine!

Otherwise, everything looks ok. You are showing 2 last notifications, and they are displayed. You can modify the script to put some additional text and simulate sending data every 300 seconds (5 min).

Do you see any problem here? What would you expect from this test that you just made?

BR,
kl3m3n

Sato

Hi kl3m3n,
Here the sreenshot

Is this what you need?

When i choose on the menu, more then 2 notifications to show, then Gui-O freeze many times, have than to force to close the App
Memory allocation?

What i expected?
That Gui-O have a good working Push notifications

I will add in your test script, text like that what i do
in my test programm, to see if it works too.
With your script it works fine, have more than 200 on index with timeout of 10 seconds.

Afternoon or tomorow i will give feedback

BR

Sato

Hello @kl3m3n,

So far, your script pub_test.bat is continuously sending notification with the index incrementing. How can I modify it so that it also sends some text.

Thanks for your help

BR

kl3m3n

@sato try adding the text before %index%:

"this is the text %index% and so is this"

Your notifications are also probably too long. My device automatically removes some of the notification text if they take up to much space. Notifications should be short and to the point.

Did you enable autostart feature for GUI-O app? And disable all battery saving features for it? Samsung has its own way of dealing with such things... Just Google this.

BR,
kl3m3n

Sato

Hie @kl3m3n
Thank you

I know, I've googled it.
The Autostart option I haven't found on my phones yet, but I'll keep looking because that could solve the issue.
Yesterday I tried to open Gui-O when the index was at 121, and I found that the App had frozen, but I was still getting the notifications from your script.
I'll turn on logcat and send it to you later, maybe you can see something that will help.

Best regards