NFC function

[Sato]

Hi @kl3m3n,

Great. THANK YOU.

Soon i will buy a Tag to make tests and give feedback.

Best regards

[Sato]

Hi @kl3m3n,

Today received the Tags

mqttClient.publish(&In[0], "|NFC UID:nfc1 HID:nfc SEN:1\r\n");
Gui-O respond with @nfc1 -2

Make NFC on, it receive nothing

Tested with my both Samsung Phones

Attached the picture of the Tags

(https://i.imgur.com/67bKB15.jpg)

Regards

[Sato]

Hi @kl3m3n,

Forgett to add the data of the Tags read with a NFC read App
Hope it can help

Best regards

[kl3m3n]

@sato Did you write any record to the tag? You need to write at least one plain text record to the tag (GUI-O does not support writing tags). There are may apps able to write the NFC data. Did you consult the manual?

Best regards,
kl3m3n

[Sato]

Hi kl3m3n,

Yes I read the Manual, but I must be doing maybe something wrong, because it doesn't work.

In the final part of making the graphical environment I put:
mqttClient.publish(&In[0], "|NFC UID:nfc1 HID:nfc SEN:1\r\n");

mqttClient.publish(&In[0], "|TON UID:ton1 HID:ton EDUR:3000\r\n");

Inside the void loop I have a Timer that periodically runs:

mqttClient.publish(&In[0], "@nfc1 SEN:1\r\n"); // wouldn't even need

mqttClient.publish(&In[0], "@ton1 1\r\n");
Serial.println("TON");

Always plays a short sound

I recorded the text "Hello Gui-O" in a Tag, with an App Tool for NFC. I can read that text even with the internal functionality of the phone, but on the serial port nothing appears.

void parseGuioMsg(const String &msg) {
Serial.println(msg); // @init usr:
variable msg is always empty

To make sure if there is something wrong with my code, I tried it with your example lamp code, but the effect is the same

Here I switch Off the NFC function on the Phone, on tap's on the lamp it shows on serial port.
GUI-O app is requesting LIGHT ON!
TON
SEN:1
@nfc1 -2 dev:OF24 R. Paris Nr.32 usr:
@light_on 1 dev:OF24 R. Paris Nr.32 usr:

GUI-O app is requesting LIGHT OFF!
@nfc1 -2 dev:OF24 R. Paris Nr.32 usr:
@light_off 1 dev:OF24 R. Paris Nr.32 usr:

Perhaps you can see what i make wrong
Thank You

Best regards

[kl3m3n]

@sato Hello!

Regarding the TON component - this component plays the tones builtin the Android device. Their length is predetermined. If you check out the manual, it says:

For TONT -> Tone type number. For reference see:
https://developer.android.com/reference/android/media/ToneGenerator

and

For EDUR -> Duration of tone in msec. Ignored if
tone duration is shorter.
Maximum duration limited to 5000
msec.

Regarding the NFC - if "-2" is returned, it means that NFC is available, but not enabled (see the manual).

You don't need to repeat the messages to enable NFC scanning. Try sending just one message:

Enable NFC detection:
|NFC UID:nfc1 HID:nfc SEN:1

Disable NFC detection:
@nfc1 SEN:0

Do you use Android 12? Do you have latest app version installed (v1.0.16)? There was a minor fix for Android 12 in this version release.

Best regards.
kl3m3n

[Sato]

Hi kl3m3n,

Thanks.
With the short sound it's no problem, but the NFC still doesn't work here.
As I informed, the only reaction from Gui-O is @nfc1 -2, I just switch off the NFC on the Phone to see if Gui-O would react.

I don't think I'm doing anything wrong, but if you want I'll send your code example to see if it works.

Yes, i update to the new version

Best regards

[kl3m3n]

@sato There was a mistake on my side. There were some changes in Android 12 that were not handled correctly by GUI-O app. Now it should work - I have tested it on Android 12 and Android 11.

The version that has the fix is v1.0.17.

I would appreciate the feedback.

Thank you.

Best regards,
kl3m3n

[Sato]

Hi kl3m3n,

Ok, Thank You
At this moment the new version is not yet available on Google Play.

Regards

[Sato]

Hi kl3m3n,

Well done, congrats!

So, now will see to implement it in my programm

THANK YOU

Best regards