GUI-O Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Issue on sending Widget on init

    Scheduled Pinned Locked Moved
    General Discussion
    2
    10
    64
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mathieu
      last edited by

      Hi everyone,

      I'm currently working on a project using an ESP32-S3 to send data and commands to the GUI-O app over Bluetooth Low Energy (BLE). My code creates a series of widgets in the app, but I'm facing an issue where only a maximum of 29 widgets are successfully displayed in the GUI-O interface. Any additional widgets beyond 29 are missing.

      I've set up the widgets using commands like sendMsg() that are sent to the app over BLE. It seems that not all widgets are properly received by the app, even though all the commands are being executed in the code. I suspect it might be due to BLE packet size limitations or possibly some commands being sent too quickly for the app to handle.

      Here are some key points:

      The commands are sent from an ESP32-S3 using BLE.
      I'm sending a long list of widget creation commands, but only 29 widgets get displayed.
      It looks like some of the messages are getting truncated or lost, as additional widgets beyond the 29th don't appear in the GUI-O app.
      The BLE message size limit may be around 512 bytes, and I’m trying to figure out the best way to fragment these commands to ensure all widgets are properly created.
      I've already tried adding delays between the commands (e.g., delay(50)), but the issue persists. I’m wondering if there's a better way to manage this, such as breaking up the message to fit within BLE packet limits, or another approach to guarantee that all widgets are properly rendered.

      Any advice on how to ensure all BLE messages are successfully received by the GUI-O app and all widgets are displayed would be greatly appreciated!

      Thanks in advance for your help!

      K 1 Reply Last reply Reply Quote 0
      • K
        kl3m3n @mathieu
        last edited by

        @mathieu Hi!

        Can you try the following:

        1. Open GUI-O app and navigate to "Info" from the settings menu
        2. Tap the app version info 10 times - this will enable developer mode
        3. Scroll to the bottom, tap on "Developer mode" and enable "Log incoming messages".

        Next, try sending the widget commands then exit the app and connect your device to a PC. Navigate to com.guio.app folder (Android - > Data) and observe the contents of the incoming log. You can post the log here.

        Note that the log will be truncated / cleared next time you start GUI-O app.

        Best regards,
        Klemen

        M 2 Replies Last reply Reply Quote 0
        • M
          mathieu @kl3m3n
          last edited by mathieu

          This post is deleted!
          1 Reply Last reply Reply Quote 0
          • M
            mathieu @kl3m3n
            last edited by

            @kl3m3n

            [2024-11-14T23:17:08.818] @cls
            [2024-11-14T23:17:08.819] @guis BGC:#FFFFFF
            [2024-11-14T23:17:08.819] |SORI UID:sori1 HID:sori ORI:2 SEN:0
            [2024-11-14T23:17:08.821] |IM UID:im0 X:10 Y:12 W:12 H:20 IP:"https://xxxxxxxxxxxxxx"
            [2024-11-14T23:17:08.836] |LB UID:lb0 X:20 Y:10 FGC:#CE9D15 SHC:#83000000 FSZ:5 FFA:"font11" TXT:"Environnemental Sensor" ALP:1 LALP:1
            [2024-11-14T23:17:08.838] |BSL UID:bsl1 X:40 Y:146 ROT:90 LEN:80
            [2024-11-14T23:17:08.838] |LB UID:lb1 X:30 Y:17 FSZ:4 TXT:"Sound / Lux"
            [2024-11-14T23:17:08.839] |LB UID:lb2 X:75 Y:17 FSZ:4 TXT:"Air quality"
            [2024-11-14T23:17:08.840] |LB UID:SENSORLUX1 X:10 Y:25 FSZ:4 TXT:"SENSORLUX1 : " ALP:1 LALP:1
            [2024-11-14T23:17:08.841] |LB UID:SENSORLUX2 X:10 Y:35 FSZ:4 TXT:"SENSORLUX2" ALP:1 LALP:1
            [2024-11-14T23:17:08.842] |LB UID:VEML6030_lux X:10 Y:45 FSZ:4 TXT:"VEML6030_lux" ALP:1 LALP:1
            [2024-11-14T23:17:08.842] |LB UID:Mic1 X:10 Y:55 FSZ:4 TXT:"Mic 1" ALP:1 LALP:1
            [2024-11-14T23:17:08.843] |LB UID:Mic2 X:10 Y:65 FSZ:4 TXT:"Mic 2" ALP:1 LALP:1
            [2024-11-14T23:17:08.844] |LB UID:BME680_IAQ X:41 Y:25 FSZ:4 TXT:"IAQ" ALP:1 LALP:1
            [2024-11-14T23:17:08.845] |LB UID:BME680_IAQ_accuracy X:75 Y:25 FSZ:4 TXT:"IAQ_accuracy" ALP:1 LALP:1
            [2024-11-14T23:17:08.846] |LB UID:BME680_Temperature X:41 Y:35 FSZ:4 TXT:"Temperature" ALP:1 LALP:1
            [2024-11-14T23:17:08.847] |LB UID:BME680_Pressure X:75 Y:35 FSZ:4 TXT:"Pressure" ALP:1 LALP:1
            [2024-11-14T23:17:08.847] |LB UID:BME680_Humidity X:41 Y:45 FSZ:4 TXT:"Humidity" ALP:1 LALP:1
            [2024-11-14T23:17:08.848] |LB UID:BME680_Gas_resistance X:75 Y:45 FSZ:4 TXT:"Gaz resist" ALP:1 LALP:1
            [2024-11-14T23:17:08.853] |LB UID:BME680_Stabilization X:41 Y:55 FSZ:4 TXT:"Stabilization" ALP:1 LALP:1
            [2024-11-14T23:17:08.853] |LB UID:BME680_Run_in_status X:75 Y:55 FSZ:4 TXT:"Run_in" ALP:1 LALP:1
            [2024-11-14T23:17:08.854] |LB UID:BME680_Compensated_temperature X:41 Y:65 FSZ:4 TXT:"Comp. temp." ALP:1 LALP:1
            [2024-11-14T23:17:08.865] |LB UID:BME680_Compensated_humidity X:75 Y:65 FSZ:4 TXT:"Comp. humidity" ALP:1 LALP:1
            [2024-11-14T23:17:08.897] |LB UID:BME680_Static_IAQ X:41 Y:75 FSZ:4 TXT:"Static_IAQ" ALP:1 LALP:1
            [2024-11-14T23:17:08.898] |LB UID:BME680_CO2_Equivalent X:75 Y:75 FSZ:4 TXT:"CO2 Equ." ALP:1 LALP:1
            [2024-11-14T23:17:08.899] |LB UID:BME680_bVOC_equivalent X:41 Y:85 FSZ:4 TXT:"bVOC equ" ALP:1 LALP:1
            [2024-11-14T23:17:08.904] |LB UID:BME680_Gas_percentage X:75 Y:85 FSZ:4 TXT:"Gaz %" ALP:1 LALP:1
            [2024-11-14T23:17:08.905] |LB UID:BME680_Compensated_gas X:41 Y:95 FSZ:4 TXT:"Comp. gas" ALP:1 LALP:1
            [2024-11-14T23:17:08.906] |BSL UID:bsl0 X:18 Y:13 LEN:100
            [2024-11-14T23:17:08.906] |BSL UID:bsl2 X:0 Y:20 LEN:100
            [2024-11-14T23:17:08.907] |BSL UID:bsl3 X:0 Y:30 LEN:100
            [2024-11-14T23:17:08.908] |BSL UID:bsl4 X:0 Y:40 LEN:100
            [2024-11-14T23:17:10.303] @lb0 TXT:"Environnemental Sensor 00:00:00:00:00:00 __"
            [2024-11-14T23:17:10.305] @SENSORLUX1 TXT:"SENSORLUX1 : 0"
            [2024-11-14T23:17:10.305] @SENSORLUX2 TXT:"SENSORLUX2 : 0"
            [2024-11-14T23:17:10.305] @VEML6030_lux TXT:"VEML6030_lux : 27.65"
            [2024-11-14T23:17:10.306] @Mic1 TXT:"Mic1 : 0"
            [2024-11-14T23:17:10.306] @Mic2 TXT:"Mic2 : 0"
            [2024-11-14T23:17:10.306] @BME680_IAQ TXT:"IAQ : 50.00"
            [2024-11-14T23:17:10.306] @BME680_IAQ_accuracy TXT:"IAQ_accuracy : 0.00"
            [2024-11-14T23:17:10.306] @BME680_Temperature TXT:"Temperature : 22.34C"
            [2024-11-14T23:17:10.306] @BME680_Pressure TXT:"Pressure : 10.14hPa"
            [2024-11-14T23:17:10.306] @BME680_Humidity TXT:"Humidity : 44.44%"
            [2024-11-14T23:17:10.358] @BME680_Gas_resistance TXT:"Gas_resis : 73.58KOhms"
            [2024-11-14T23:17:10.447] @BME680_Stabilization TXT:"Stabilization : 1.00"
            [2024-11-14T23:17:10.535] @BME680_Run_in_status TXT:"Run_in : 0.00"
            [2024-11-14T23:17:10.622] @BME680_Compensated_temperature TXT:"Comp. temp. : 21.88            C"
            [2024-11-14T23:17:10.758] @BME680_Compensated_humidity TXT:"Comp. hum : 45.72"
            [2024-11-14T23:17:10.845] @BME680_Static_IAQ TXT:"Static_IAQ : 50.00"
            [2024-11-14T23:17:10.933] @BME680_CO2_Equivalent TXT:"CO2_Equ. : 500.00ppm"
            [2024-11-14T23:17:11.021] @BME680_bVOC_equivalent TXT:"bVOC_equ. : 0.50ppm"
            [2024-11-14T23:17:11.157] @BME680_Gas_percentage TXT:"Gas perc : 0.00%"
            [2024-11-14T23:17:11.247] @BME680_Compensated_gas TXT:"Comp. gas : 4.83"
            [2024-11-14T23:17:11.836] @lb0 TXT:"Environnemental Sensor 00:00:00:00:00:00 __"
            [2024-11-14T23:17:11.967] @SENSORLUX1 TXT:"SENSORLUX1 : 0"

            K 1 Reply Last reply Reply Quote 0
            • K
              kl3m3n @mathieu
              last edited by

              @mathieu Hi!

              I can see only 29 widgets in the log, which means GUI-O did not receive commands for other widgets.
              I am guessing that there is a problem with message loss (too much data in a short interval) due to limited buffer space of the BLE stack.

              But, as you've said - adding a "short" delay did not help. Can you try adding a larger delay just for testing? You can add it after every 3rd command for example.

              You could also try updating the connection parameters (decrease connection interval) after the connection is established (using pServer->updateConnParams method):
              https://github.com/espressif/arduino-esp32/blob/master/libraries/BLE/src/BLEServer.h#L78

              Also you can try more structured approach by sending a "chunk" of data (e.g., 100 bytes - without breaking the individual commands) and then waiting for a short time before sending the next chunk.

              Best regards,
              Kl3m3n

              M 1 Reply Last reply Reply Quote 0
              • M
                mathieu @kl3m3n
                last edited by mathieu

                @kl3m3n by adding 200 of delay looks good. But no very efficien I didn't find an acknoledge mecanism in the api .

                And with this time out I receive message "No response from remote device"

                I'm not an software expert I'm hardware designer and frankly speaking I don't know exactly the behaviour if I change the connection settings.

                void sendMsg(const String &msg) {
  // Set value and notify the client
  Serial.println("Envoi du message : " + msg);
  pCharacteristic->setValue(msg.c_str());
  pCharacteristic->notify();
  delay(DELAYSENDMSG);
}
//with delay at 200

                if I put delay each 3 instruction the issue is the same

                K 1 Reply Last reply Reply Quote 0
                • K
                  kl3m3n @mathieu
                  last edited by

                  @mathieu Hi!

                  Is it possible for you to send me the initialization commands, so I can reproduce your issue and try to solve it? You can send them to info.guio.app@gmail.com.

                  Did you consider using legacy Bluetooth (not BLE, but Classic), which is more suited for such large payloads?

                  Best regards,
                  Kl3m3n

                  M 1 Reply Last reply Reply Quote 0
                  • M
                    mathieu @kl3m3n
                    last edited by

                    @kl3m3n said in Issue on sending Widget on init:

                    info.guio.app@gmail.com.

                    I will send you the code for my esp32 .

                    via network it's works perfectly with the software for windows.
                    unfortunatly via esp32 I have only BLE.

                    K 1 Reply Last reply Reply Quote 0
                    • K
                      kl3m3n @mathieu
                      last edited by

                      @mathieu Hi.

                      I will take a look at your initalization and see how the issue can be mitigated. I will get back to you.

                      Some Esp32 variants support classic bluetooth also. Here is the GUI-O example:
                      https://www.gui-o.com/examples/gui-o-and-boards/esp32#h.91so3s2tov2e

                      Best regards,
                      Kl3m3n

                      M 1 Reply Last reply Reply Quote 0
                      • M
                        mathieu @kl3m3n
                        last edited by

                        @kl3m3n sure but unfortunatly I'm using an esp32-S3 on my custom hardware

                        https://esp32.com/viewtopic.php?t=32664

                        Best regards

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post