"PGF:1" parameter
-
Good morning,
If I activate the "PGF:1" parameter, is it normal that GUI-O does not inform the remote processor of the page change? Or am I missing something.....
Sincerely Bernard -
@Bernard Hi!
No, this is a GUI-O application side feature only. It just navigates through the "pages" if there is more than one page available.
If you want GUI-O to send the "flick" action, you need to use the |FLA widget.
I hope this helps.
Best regards,
kl3m3n -
Bonjour !
Thanks for the info "|FLA", it works fine, Another question, it happens sometimes when GUI-O sends the "Init" command , the remote processor does return all the WIDGETs; I can check it on a terminal; but GUI-O runs indefinitely without displaying anything. I have to exit the app. GUI-O, reconnect and it works. A small idea?
Bernard -
@kl3m3n
OK I found it! the remote processor sends the widgets to GUI-O in 2 parts. the 1st block ~ 30 widgets on page 0, and the second block ~20 widgets on page 1. (these are 2 distinct functions) even if they are chained GUI-O doesn't like that! so I send everything in one block and it's OK.
Bernard -
@Bernard Hi!
Great that you've found a solution.
Could you please explain this a bit more:
@Bernard said in "PGF:1" parameter:
(these are 2 distinct functions)
Can you please give me a short example, so I can test this (maybe there is some bug in GUI-O, which I could fix)? Generally, GUI-O should accept chained commands in any order as long as each command is terminated by CRLF (\r\n)...
Thank you.
Best regards,
kl3m3n -
@kl3m3n
Good morning,
I specify that I work with Bascom. here is a code snippet:
I have 2 blocks: Guio_ini_1 and Guio_ini_2. If I call Guio_ini_1 and Guio_ini_2 , the circular bar spins and spins indefinitely (as if there is no "'Print "@hls xxx". If I remove the "return" and Print "@hls 200" afterwards Guio_ini_1 and that I call Guio_ini_1, everything is going well!Gosub Guio_ini_1 Gosub Guio_ini_2 Print "@sci SCI:0" Guio_ini_1: Print "@sls 200" ' hide writing objects 'masquer les objets d'écriture Print "@cls" ' clear HW components of phone ^'effacer les composants matériels du téléphone Print "@clh" ' clear screen on smart phone 'écran clair sur téléphone intelligent Print "@clo" 'clear orientation Print "@gse COD:0 TSC:39" 'Use ' instead of " (chr(34) Print "@guis BGC:#000000 ASR:0.0.4615" 'fond noire, ratio ecran, PGF=1 valider le changement de page !! mais le programme à de la peine...... Print "|SORI UID:sori1 HID:sori ORI:2 SEN:0" ' oriantation paysage 'Print "@sci SCI:0" Waitms 100 Print "|IM UID:im0 X:50 Y:50 W:300 H:100 IP:'giphy_1.gif' OPA:1 PLS:1 SCM:0 ACT:0" ' image de fond Waitms 20 Print "|CB UID:cb_T X:18 Y:30 W:19 BGC:#6E7274 FGC:#81DB64 SFGC:#FD1B28 HAW:2 HAH:3 HAR:2 LVAL:-20 HVAL:60 UD:2 FSZ:5 FFA:'font6' BTH:1.5 TXTC:#FFFFFF YTC:3 SHN:1 SHT:1" ' circulaire température Waitms 20 Print "|LB UID:lb_T X:18 Y:45 W:15 FGC:#FB0001 SHE:1 FSZ:5 FFA:'font2' TXT:'temp.'" 'texte température Waitms 20 Print "|LB UID:lb_Vt X:18 Y:20 W:15 FGC:#FB0001 SHE:1 FSZ:5 FFA:'font2' TXT:'00.00'" ' affichage numérique température Print "|CB UID:cb_H X:50 Y:30 W:19 BGC:#6E7274 FGC:#81DB64 SFGC:#FD1B28 HAW:2 HAH:3 HAR:2 LVAL:10 HVAL:100 UD:2 FSZ:5 FFA:'font6' BTH:1.5 TXTC:#FFFFFF YTC:3 SHN:1 SHT:1" ' circulaire humidité Print "|LB UID:lb_H X:50 Y:45 W:15 FGC:#00F7FF SHE:1 FSZ:5 FFA:'font2' TXT:'hum.'" 'texte humidité Print "|LB UID:lb_Vh X:50 Y:20 W:15 FGC:#00F7FF SHE:1 FSZ:5 FFA:'font2' TXT:'00.00'" ' affichage numérique humidité Print "|CB UID:cb_P X:83 Y:30 W:19 BGC:#6E7274 FGC:#81DB64 SFGC:#FD1B28 HAW:2 HAH:3 HAR:2 LVAL:600 HVAL:1050 UD:2 FSZ:5 FFA:'font6' BTH:1.5 TXTC:#FFFFFF YTC:3 SHN:1 SHT:1" ' circulaire pression Print "|LB UID:lb_P X:84 Y:45 W:15 FGC:#FFFF00 SHE:1 FSZ:5 FFA:'font2' TXT:'altit.'" 'texte pression Print "|LB UID:lb_Vp X:84 Y:20 W:15 FGC:#FFFF00 SHE:1 FSZ:5 FFA:'font2' TXT:'00.00'" ' affichage numérique pression Waitms 20 Print "|CH UID:ch0 X:50 Y:75 W:50 H:50 XLO:0 BSZ:120 VLP:2 BGC:#E53A4456 FGC:#EF33EAF5 SHE:1 FSZ:2.5 RAD:1 CHT:2 CHN:'MESURE HUM / TEMP / PRESSION' XTC:12 YTC:6 YMA:4 XMA:2 XHI:75 PZO:0" ' graphique data Print "|BT UID:bt_1 X:18 Y:65 W:12 H:12 FSZ:5 TXT:'1 Sec'" ' bouton 1 sec Print "|SI UID:Si_1 X:8 Y:65 W:3.5 BGC:#FF0003" 'led 1sec Print "|BT UID:bt_10 X:18 Y:79 W:12 H:12 FSZ:5 TXT:'10 Sec'" 'bouton 10 sec Print "|SI UID:Si_10 X:8 Y:79 W:3.5 BGC:#FF0003" 'led 10 sec Waitms 20 Print "|LB UID:lb_Si10 X:8 Y:80 W:3.5 FGC:#FB0001 SHE:1 FSZ:5 FFA:'font2' TXT:'0' VIS:0" ' affichage des seconde pour bouton 10sec Print "|BT UID:bt_60 X:18 Y:93 W:12 H:12 FSZ:5 TXT:'1 Min.'" 'bouton 1min. Print "|SI UID:Si_60 X:8 Y:93 W:3.5 VIS:1 BGC:#FF0003" 'led 1 min. Print "|LB UID:lb_Si60 X:8 Y:93 W:6 VIS:1 FGC:#FB0001 SHE:1 FSZ:5 FFA:'font2' TXT:'0' VIS:0" ' affichage des seconde pour bouton 1 min. Print "|TI UID:f_name X:86 Y:54 W:19 BGC:#C7FFFC FGC:#4C4C4C SHE:0 SHC:#F3FF0000 FSZ:7 FFA:'font6' RAD:1 BTH:0.2 TXT:'file.txt' " ' saisi nom du fichier Print "|EXTF UID:extf1 HID:extf FAC:0 FNA:'" ; F_name ; "'" ' définir le nom du fichier sur téléphone Print "|BT UID:bt_St X:86 Y:66 W:20 H:12 FGC:#00FF00 SHC:#99000000 FSZ:5 TXT:'Start Record.'" ' touche start / stop ... vert Print "|BT UID:bt_Of X:86 Y:79 W:20 H:12 FSZ:5 TXT:'Open File'" ' touche voir Print "|BT UID:bt_Part X:81 Y:93 W:10 H:12 FSZ:5 TXT:' Share '" ' bouton partage Print "|BT UID:bt_Del X:91 Y:93 W:9 H:12 FSZ:5 TXT:' Delete '" ' bouton delete file Waitms 20 Print "|RTC UID:rtc1 HID:rtc RTCE:1 RTCR:1 RTCF:'yy.MM.dd HH:mm:ss'" ' heure Print "|LB UID:datum X:32 Y:6 ROT:0 SHE:1 ALP:1 FGC:#42ECF5 FSZ:5 FFA:'font6' TXT:'DAT'" 'Labele Date Print "|LB UID:ura X:64 Y:6 ROT:0 SHE:1 ALP:1 FGC:#42ECF5 FSZ:5 FFA:'font6' TXT:'TIM'" 'Labele Time" Print "|LB UID:lbguio X:64 Y:12 FGC:#FFFFFF SHE:1 FSZ:3 FFA:'font7' TXT:'GUI-O' ALP:1" 'label GUI-O Print "|LB UID:lbguiov X:64 Y:12 FGC:#00FFFFFF SHE:1 FSZ:3 URL:1 FFA:'font6' TXT:'https://www.gui-o.com' ALP:1" 'URL GUI-O Print "|LB UID:lbesp X:33 Y:12 VIS:1 FGC:#FFFFFF SHE:1 FSZ:3.5 FFA:'font7' TXT:'wiffi' ALP:1" ' label wiffi Waitms 20 Print "|LB UID:lbespv X:33 Y:12 FGC:#00FFFFFF SHE:1 FSZ:2 URL:1 FFA:'font6' TXT:'https://randomnerdtutorials.com/esp8266-pinout-reference-gpios' ALP:1" 'URL Wifi Print "|BT UID:bt_r X:18 Y:53 W:12 H:7 FSZ:5 TXT:'reset'" 'touche reset Print "|LB UID:lblat X:32 Y:40 VIS:1 FGC:#FFFFFF SHE:1 FSZ:3.8 FFA:'font7' TXT:'Lat N:' ALP:1" ' label Latitude Print "|LB UID:lblatv X:32 Y:45 ROT:0 SHE:1 ALP:1 FGC:#42ECF5 FSZ:4.5 FFA:'font6' TXT:'--'" 'Valeur Latitude Print "|LB UID:lblng X:63 Y:40 VIS:1 FGC:#FFFFFF SHE:1 FSZ:3.8 FFA:'font7' TXT:'Long E:' ALP:1" ' label Longitude Print "|LB UID:lblngv X:64 Y:45 ROT:0 SHE:1 ALP:1 FGC:#42ECF5 FSZ:4.5 FFA:'font6' TXT:'--'" 'Valeur Longitude Print "|LB UID:lbggps X:64 Y:44 FGC:#00FFFFFF SHE:1 FSZ:3 URL:1 FFA:'font7' TXT:'https://www.coordonnees-gps.fr/' ALP:1" ' URL carte gps Print "|BAT UID:bat1 HID:bat SRAT: 0.05" 'charge batterie telephone Print "|LB UID:lbbat X:48 Y:35 VIS:1 FGC:#FFFFFF SHE:1 FSZ:3.8 FFA:'font7' TXT:'Batt.%:' ALP:1" 'affichage texte batterie Print "|LB UID:lbbatv X:50 Y:39 W:15 FGC:#00F7FF SHE:1 FSZ:5 FFA:'font6' TXT:'00.00'" 'affichage valeur batterie Print "|TON UID:ton1 HID:ton EDUR:1000 TONT:24" 'definition du beep Print "|POS UID:pos1 HID:pos SRAT:0.1" ' Enclancher GPS Print "|FLA UID:fla0 X:50 Y:95 H:10 W:50 OPA:0.1 CTRS:2 SCI:0" 'barre de navigation page 1 Print "@hls 200" Return Print "|IM UID:imx X:15 Y:50 W:100 H:100 ROT:0 SHE:0 VIS:1 OPA:0 ACT:0 SCM:0 IP:'Cardio.jpg' SCI:1" 'GUI-O Image ECG.jpg copy to smartphone \Phone\Android\data\com.guio.guioapp\files\Pictures\ Print "|CH UID:ch2 X:65 Y:75 W:72 H:50 BTH:0.1 XTC:10 YTC:8 VIS:1 BSZ:200 CHT:2 BMA:0.03 XLO:0 XHI:40000 BGC:#FFFFFF FGC:#900000 RAD:0 LT:0.15 XMA:5 YMA:8 FFA:'font6' CHN:'ELECTRO CARDIOGRAM' FSZ:4 SCI:1" Waitms 20 Print "|CH UID:ch1 X:65 Y:25 W:72 H:50 BTH:0.1 XTC:10 YTC:8 VIS:1 BSZ:5 DRA:0 BGC:#FFFFFF FGC:#900000 RAD:0 LT:0.15 XMA:5 YMA:8 SHVL:1 VLP:0 CHN:'PULSE' FFA:'font6' FSZ:4 SCI:1" Waitms 20 'GUI-O graph for pulse and Cardio Print "|LB UID:lbpulse X:87 Y:35 ALP:1 ROT:0 SHE:1 FGC:#000000 FFA:'font6' FSZ:16 TXT:'---' SCI:1" 'Label for number-pulse" Print "|LB UID:lbpname X:85 Y:23 ALP:1 ROT:0 SHE:1 FGC:#000000 FFA:'font8' FSZ:4 TXT:'PULSE BMP' SCI:1" 'Label for name Print "|LB UID:lbname X:2 Y:92 ALP:1 ROT:0 SHE:1 FGC:#FFFFFF FFA:'font7' VIS:1 FSZ:10 TXT:'ECG' SCI:1" 'Label general name Print "|BT UID:btsound X:22 Y:92 W:10 H:10 ROT:0 RAD:1 SHVR:0.8 SHE:1 SHC:#404040 BGC:#808B96 SBGC:#808B96 FGC:#FFFFFF FSZ:6 BTH:0 FFA:'font6' TXT:'Sound' SVAL:'Stop' SCI:1" Print "|FLA UID:fla1 X:50 Y:95 H:10 W:50 OPA:0.05 CTRS:2 SCI:1" 'barre de navigation page 2 Print "@hls 100" 'end writting objects Return -
@kl3m3n
Sorry, of course before the 2nd block there is the name of the SUB Guio_ini_2: -
-
@kl3m3n
Hello,
Bascom automatically adds cr/lf after a print . When you end a print with ";" it does not add cr/lf
is it correct that once a CHART widget is written, it is no longer possible to modify any of these parameters?
Sincerely Bernard -
@Bernard
In your Sub, the Return statement is used twice. Maybe that's the problem.
After first return statement must be:
Guio_ini_2:@hls 250 should be at the end of the Init procedure.
I checked the Init process without the Bascom code and it works OK.Maybe put |CH
|CH UID:ch0 X:50 Y:75 W:50 H:50 XLO:0 BSZ:120 VLP:2 BGC:#E53A4456 FGC:#EF33EAF5 SHE:1 FSZ:2.5 RAD:1 CHT:2 CHN:'MESURE HUM / TEMP / PRESSION' XTC:12 YTC:6 YMA:4 XMA:2 XHI:75 PZO:0 @hls 250just before @hls 250
Otherwise, your GUI-O screen is very nice
