<![CDATA[BASACOM and CAN BUS]]>Hello,

Does anyone have a functional example code in Bascom for an microcontroller like Atmega88 or other microcontroller from Atmel without intern CAN hardware to use CAN BUS communication

Thanks
Best regards

]]>https://forum.gui-o.com/topic/142/basacom-and-can-busRSS for NodeSun, 17 May 2026 06:12:45 GMTTue, 06 Jun 2023 12:19:50 GMT60<![CDATA[Reply to BASACOM and CAN BUS on Mon, 19 Jun 2023 13:21:23 GMT]]>Hi @kl3m3n,

Thanks, I know this chip, but never used it

I have done in the last 20 years almost all my projects with Bascom and Atmega and Xmega microcontrollers, but there are no libraries like in the Arduino, you have to code everything from scratch. With the Esp32 this task is easier, for this there is the lib can.h and you only need the soic8 driver for the bus.

The advantage is that the Atmega88PA is cheaper than the Esp32 but I will still think about which one to choose

Thanks for the attempt to help

Regards

]]>https://forum.gui-o.com/post/577https://forum.gui-o.com/post/577Mon, 19 Jun 2023 13:21:23 GMT<![CDATA[Reply to BASACOM and CAN BUS on Sun, 18 Jun 2023 18:45:03 GMT]]>@Sato said in BASACOM and CAN BUS:

Hello,

Does anyone have a functional example code in Bascom for an microcontroller like Atmega88 or other microcontroller from Atmel without intern CAN hardware to use CAN BUS communication

Thanks
Best regards

How about using a CAN transciever, e.g., MCP2551?

https://www.microchip.com/en-us/product/MCP2551

Best regards,
kl3m3n

]]>https://forum.gui-o.com/post/576https://forum.gui-o.com/post/576Sun, 18 Jun 2023 18:45:03 GMT<![CDATA[Reply to BASACOM and CAN BUS on Mon, 12 Jun 2023 15:43:53 GMT]]>Hello,
I have never used CAN BUS . In the bascom help in "CONFIG CANBUSMODE" there is an example....
Bernard

]]>https://forum.gui-o.com/post/571https://forum.gui-o.com/post/571Mon, 12 Jun 2023 15:43:53 GMT<![CDATA[Reply to BASACOM and CAN BUS on Mon, 12 Jun 2023 13:43:00 GMT]]>@Sato
Maybe something like this:

https://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&t=13842&highlight=canmob

]]>https://forum.gui-o.com/post/570https://forum.gui-o.com/post/570Mon, 12 Jun 2023 13:43:00 GMT<![CDATA[Reply to BASACOM and CAN BUS on Fri, 09 Jun 2023 15:50:16 GMT]]>Hello @Bernard,

I look for a example code in Bascom that use CAN communication. I never used CAN BUS communication, but i needed it for a new project.

Best regards

]]>https://forum.gui-o.com/post/569https://forum.gui-o.com/post/569Fri, 09 Jun 2023 15:50:16 GMT<![CDATA[Reply to BASACOM and CAN BUS on Tue, 06 Jun 2023 20:56:11 GMT]]>Good morning Sato,
I'm not sure I understand your question! Are you looking for an example of Bascom code with or without CAN?

Bernard

]]>https://forum.gui-o.com/post/568https://forum.gui-o.com/post/568Tue, 06 Jun 2023 20:56:11 GMT